Skip to main content
Tiffin Motorhomes Knowledge Base

2017 Open Road Integration Schematic

  1. Last updated
  2. Save as PDF

Diagnostic LED Features

Each SWITCH PANEL and CONTROL PANEL has built in LED indicators. The CHANNEL LED corresponds with the circuit listed on the chart to the left and indicates if the circuit is ON or OFF. The NETWORK LED indicated if the panel has power and whether or not it is communicating with the other panels within the network.

In the event of a switch panel with a NETWORK LED that indicates a fault, unplug the SWITCH PANEL and plug it into a different NETWORK LOCATION. This could be where another SWITCH PANEL is plugged into. If the SWITCH PANEL LED turns solid green, this could indicate a network wiring issue. Refer to the NETWORK WIRING GUIDE in the previous page.

clipboard_eed8562776ca40695f499ee8ca9e94c2c.png

clipboard_e020474b942458ec055ddc24abf3b7984.png

Network Diagram

clipboard_ea2f82a1e2b7dd0d3c5e9337f57b8d78f.png

Pinout Diagram

clipboard_e3070c51706387ed1bf340dee810a5d0f.png

DCBR 24-33 Panel Lights

clipboard_e1321a63fbef12a4eaf746dabad9710ff.png

DCBR 24-33 Panel Motors

clipboard_e661ef29d462d417416bd4096a3a8f279.png

Slide Control

clipboard_e46131361f00d90693211b66701fa4e0a.png

Panel Lights and Tank Monitor System

clipboard_e7ea2d2576a12a28eeddb08977804d5e7.png

Water Heater and Pump

clipboard_eafbcddb8f42e530f4f811ec699a1876f.png

Spyder DC Panel

clipboard_e792429ca7b84630060fe570ba5a041e7.png

CDC Relay Panel

clipboard_eddce7215677a75857923b57febbe4e88.png

clipboard_e9e285afde4fb6017d1ac10d5320fcf66.png

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Page type
    Topic
  2. Tags
    This page has no tags.