Skip to main content
Tiffin Motorhomes Knowledge Base

2016 Open Road Integration Schematic

  1. Last updated
  2. Save as PDF

Diagnostic LED Features

Each SWITCH PANEL and CONTROL PANEL has built in LED indicators. The CHANNEL LED corresponds with the circuit listed on the chart to the left and indicates if the circuit is ON or OFF. The NETWORK LED indicated if the panel has power and whether or not it is communicating with the other panels within the network.

In the event of a switch panel with a NETWORK LED that indicates a fault, unplug the SWITCH PANEL and plug it into a different NETWORK LOCATION. This could be where another SWITCH PANEL is plugged into. If the SWITCH PANEL LED turns solid green, this could indicate a network wiring issue. Refer to the NETWORK WIRING GUIDE in the previous page.

clipboard_ef7a9ea0c0603a7016ed66b2ec0784480.png

clipboard_e2f924c29682e3f6989ed450574e59a84.png

Network Diagram

clipboard_e03149f1207736201ddc4c56b0f714de4.png

Pinout Diagram

clipboard_e60fb5d01ecbcc3104f1ce8abcbb1c763.png

Panel Lights

clipboard_e1c2d6006aeee5f16b54cc01c84c8b75e.png

Panel Motors

clipboard_e44c14f89099e3842fb1233ea49da84c2.png

Panel Slide Control

clipboard_ead5ca73469529260b19ce774cc35a555.png

Panel Lights and Tank Monitor

clipboard_e11fc92b5335ef14c13552562ac07e6b1.png

Panel Water Heater

clipboard_eb03c74e8f7808df8f9a082d675135d9a.png

DC Panel

clipboard_e7ad51511138d7ede0162801af879c5b7.png

CDC Relay Panel

clipboard_ebd1016309aae2e5d5647dde2882fcc5d.png

 

 

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Page type
    Topic
  2. Tags
    This page has no tags.