Magnum Auto Generator Start

Thank you from all of us at Sensata Technologies for purchasing this ME-AGS-N (Auto Generator Start - Network) controller. The ME-AGS-N is a product under the Magnum-Dimensions band from Sensata Technologies. We understand that you have many purchasing options in the marketplace, an dare pleased that you have decided on this product. This AGS-N controller was proudly assembled and tested in the United States.
At Sensata we are committed to providing you with quality products and services. We hope your experience with us is positive.
Disclaimer of Liability
Since the use of this manual and the conditions or methods of installation, operation, use and maintenance of the ME-AGS-N is beyond the control of Sensata Technologies, this company does not assume responsibility and expressly disclaims liability for loss, damage or expense, whether direct, indirect, consequential or incidental, arising out of or anyway connected with such installation, operation, use, or maintenance.
Note as well that while every precaution has been taken to ensure the accuracy of the contents of this manual, the specifications and product functionality may change without notice. Sensata Technologies assumes no responsibility for errors or omissions.
Restriction on Use
The ME-AGS-N may only be used in life-support devices or systems with the express written approval of Sensata Technologies. Failure of the ME-AGS-N can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. If the ME-AGS-N fails, it is reasonable to assume that the health of the user or other persons may be endangered.
Copyright Notice
Copyright © 2016 by Sensata Technologies. All right reserved. Permission to copy, distribute, and/or modify this document is prohibited without express written permission by Sensata.
Document Information
Description - ME-AGS-N Owner's Manual
Part number and Revision - 64-0039 Rev B
Date Published - March 2016
This manual is printed without color for cost savings. However, this entire manual can be downloaded from our website (see below) with many diagrams available in color.
Contact Information
Sensata Technologies
Web: www.Magnum-Dimensions.com
Product Safety Information
Important Product Safety Instructions


Battery Safety

Table of Contents


Introduction
1.0 Introduction

Generator Compatibility

1.3 ME-AGS-N Features

Installation
2.0 Installation


2.2 Required Material/Tools (not included)

2.3 Mounting Procedure

2.4 Connecting the Supplied Cables to the AGS-N

2.4.1 Remote Temp Sensor Cable

2.4.2 Network Communications Cable

2.5 Connecting the AGS-N to an Inverter

2.5.1 Cable Connections with Multiple Devices

2.5.1.1 Negative Connections

2.6 Connecting the AGS-N to a Generator

2.6.1 Power Connections (Terminals 3 & 4)

2.6.2 Generator Run Sense Connection (Terminals 2 & 4)


Installation

2.6.3 Gen Start/Stop Connections (Terminals 1, 5, 6, 7, & 8)


2.6.4 Common Generator Wiring Diagrams


2.7 Warning Label





Setup
3.0 AGS-N Controller Setup
This section covers configuring the AGS's internal settings.
3.1 Configuring the Internal AGS-N Settings


Operation
4.0 AGS-N Functional Operation

4.1 AGS Power-Up Test


4.3 AGS-N Controller LED Indicators
The controller has two LED indicators for viewing system operation.
4.3.1 STATUS LED Indicator

4.3.2 READY LED Indicator

Troubleshooting
5.0 AGS-N Controller Troubleshooting
5.1 Using the AGS-N's LED Indicators

5.2 Generator Starting/Running Troubleshooting

5.2.1 If the Generator does not Start or Run

5.2.2 If the STATUS LED does not go Solid



Appendix
6.0 Appendix
6.1 Other Accessories and Equipment
Sensata offers a number of devices and accessories that can be used to expand and enhance your AGS and inverter/charger system.
6.1.1 Optional Accessories for the AGS-N
AGS Pigtail Adapters

Battery Monitor

MagWeb (device monitoring through the Internet)

Magnum Enclosures

6.2 AGS Revisions and Inverter Compatibility



