Girard Guard Auto TV Enclosure
1) 110v AC Power supply from vehicle power distribution board.
2) Output to TV Door motor control.
3) Initiate retract signal from parking brake.
4) 12v DC to LED lighting.
Specifications
Power: 110VAC / 60Hz
AC Input: White= Neutral/ Black = Live/ Green = Earth
To the Motor: White= Neutral/ Red = Direction 1 /Black= Direction 2 / Green = Earth
Ambient T: 0 - 130°F
Installation
A circuit breaker protected 15A/115v AC power outlet is required form the Vehicles power distribution panel as shown in the diagram below.
For inquiries or assistance with programming any of your Girard TV Door and/or
G-Link devices please call The Girard Group TOLL FREE on 800-382-8442 between 7:30am and 3:30pm P.S.T.
CONTENTS
Control Unit Wiring Diagram............................................................................ 4
TV Door Operation............................................................................................ 5
Control Unit Overview....................................................................................... 6
THE G-LINK SYSTEM
The G-Link motors and control modules provided by Girard Guard communicate by use of RF signals on a frequency of 433.92 MHZ. This eliminates the need for wiring and the drilling of holes in the vehicle. These components must be electronically matched, programmed or paired before use. This is usually done at the Girard Guard factory. Should the need arise for the user to pair a device with the motor controller they must refer to the appropriate manual for the devices applicable to their particular installation.
PRODUCT DESCRIPTION
The Girard Guard TV Door is an innovative addition to any RV whether a family floorplan travel trailer or fifth wheel, or a class A diesel coach. Providing a weather proof box that fits up to a 43" LCD Smart TV, your outdoor entertainment just got bigger and better!
You're called to the great outdoors, and Girard's TV Door can make your outdoor living space and entertainment hub. The all steel box is sturdy with steel lift arms and aluminum door. Girard's tubular motor operates the lift arms to open the TV Door for viewing. With LED backlighting and optional surround sound your outdoor TV viewing becomes a unique experience. Enjoy the game, the concert, the race, or your favorite movies and shows while embracing your RV lifestyle.
The TV Door must be closed prior to moving the vehicle.
As an extra safety precaution a visual check there are no people/objects in the TV Door's path is highly recommended. Damage caused by failure to comply with these instruction s. is not covered by warranty.
Before using your TV Door, ensure that the area into which the TV Door will be deployed is free of obstructions (Trees, walls, pillars, posts, other vehicles etc.)
Damage caused by collisions with any of the above or similar is not covered by warranty.
Before using your TV Door make sure that all of your electrical circuits are operating correctly. Recreational Vehicles can generate AC power from three separate sources. The electrical system transfer switch in your vehicle will select power for the awning as follows:
Shore Power - if connected;
Generator Power - if the generator is running;
Inverter Power - batteries must be charged for inverter operation.
Girard Guard 1V Doors are supplied with an electric motor appropriate to the product.
GIRARD GUARD AUTO TV ENCLOSURE
GTVB4629
USER MANUAL REV.05212019
