Skip to main content
Cummins Generator Remote Monitoring and Control System
- Last updated
-
-
Save as PDF



1 Important Safety Instructions
1.1 Warning, Caution, and Note Styles Used in This Manual

1.2 General Safety Precautions

2 Introduction
2.1 About this Manual

2.2 List of Abbreviations

2.3 How to Obtain Service

3 Product Overview

3.1 EC-AGS+ Compatibility


3.2 Certifications

4 Description
4.1 EC-AGS+ Features

4.2 EC-AGS+ Gateway

4.3 Temperature Sensor


5 Installation and Setup
5.1 System Overview

5.2 Supplied Hardware

5.3 Additional Hardware

5.4 Installation Items Not Supplied

5.5 Installation Instructions

5.5.1 Mount Components


5.6 Mobile Application Setup

5.6.1 System Requirements

5.6.2 Getting Started

5.6.3 Configure System Using App





5.6.3.1 Temperature Sensor Setup



5.7 Installation and Setup Test


6 EC-AGS+ Mobile Application

6.1 Menu Bar

6.2 User Profile


6.3 Generator Set Dashboard

6.4 Settings


6.5 Contact


6.6 Alerts

7 Operation
7.1 Manual Generator Set Operation

7.2 Automatic Generator Set Operation

7.2.1 Safety Feature


7.2.2 Adaptive Cycle Management

7.2.2.1 Limit Short Cycling

7.2.2.2 Quiet Time Prefill

8 Troubleshooting

8.1 App Does Not Install, Initialize, or Crashes

8.2 Unable to Pair Temperature Sensor to Gateway

8.3 Mobile Device Does Not Communicate or Pair to Gateway


8.4 Generator Set Does Not Start in Manual Mode

8.5 Generator Set Does Not Start in Auto Mode


8.6 Generator Set Starts Unexpectedly


8.7 Generator Set Does Not Stop


8.8 Generator Set Stops Unexpectedly


8.9 Generator Set Does Not Run A/C

8.10 House Battery State-of-Charge is Inaccurate

8.11 Temperature is Inaccurate


8.12 Clock is Inaccurate

8.13 Accelerometer Fault

9 Temperature Sensor Battery Replacement

10 Parts Information
10.1 Standard Parts

10.2 Conditional Parts

Appendix A. Connectivity Diagrams





